Marine Products

Marine Deck Matting – Teak/Black (U Groove)

Give your boat a fresh new look today!

These sheets are pre-cut with wide ribs. Perfect for DIY installations.

  • Made from High Quality Marine Grade Foam
  • Closed cell waterproof
  • Marine Grade PSA Self-Adhesive backing
  • Light Weight
  • Attractive Non-slip pattern
  • Soft under foot
  • Easy to clean
  • Ideal for boat floors, launches, jet boats, boat decks, steps, wet areas, stand up paddle boards, surf boards, jet skis, trailer boats

Price

6mm thick x 1.1m wide x 2.1m long = $187.00 plus gst

Colours

Available in:

Teak with Black Ribs

Light Grey with Black Ribs

Dark Grey with Black Ribs

Dimensions

Sheet Size: 6mm thick x 1.1m x 2.1m

Rib Size: 50mm wide with 6mm gap between the ribs

The ribs run down the 2.1m length of the sheet

Instructions

Marine Deck Tread Application:

– Please ensure surface is cleaned with detergent and warm water and rinsed clean.

– Rub surface with a Scotchbrite pad.

– When dry, wipe surface with wax and grease remover using a clean lint free cloth.

– Press matting into place with heavy, even pressure for approx. 30 seconds.

– Allow 24hrs for tape to cure

 

Please note that the foam is directional. This means the sheets need to be laid in the same direction. If one sheet is turned around, the light reflection causes the sheet to appear lighter or darker.

We will pack the sheets in the same direction, but please double check before installing.